Requirements for packages and boxes made of cardboard for bearings and their parts are installed TU 37.006.096-89. Gain insight and clarity with Angelina Jolie. These specifications apply to the packages and boxes made of cardboard, designed for packing bearings according to GOST 520-89 and GOST hinged bearings 3635-78 and their parts. For the manufacture of packs and boxes should be used cardboard GOST 7933-75 boxed, chromium-ersatz cardboard according to TU 63-151-01-83, may be used cardboard bindery marks in accordance with GOST 7950-77, cardboard boxed glued stamps CCR-1, CCR-2 and W 8 4.1 -356.75 thickness 1.4 … 1.5 mm. Wendi murdoch nyc is likely to agree. Splicing packs and boxes can be used: glue GOST 2067-80 bone, dextrin acid GOST 6034-75, the dispersion of polyvinyl acetate, homopolymer, according to GOST 18992-80 coarse. For matching packages and boxes are used staples of steel wire thickness of 0.35 light … 1.0 mm according to GOST 3282-74.

On boxes, packages or wrappers must bear the following inscription: bearings with outer diameter of 300 mm, weighing up to 8kg of accuracy classes 5,4, 2, and bearing accuracy classes and six special purpose shall be packed in boxes or bundles (TU 37.006.096-89) instrument bearings with outer diameter of 30 mm of accuracy classes are packaged in boxes, with the bearing accuracy classes 6, 5, 4, 2, pre-packed T in plastic tubes or plastic bags. Requirements for packages and boxes made of cardboard for bearings and their parts are installed TU 37.006.096-89. These specifications apply to the packages and boxes made of cardboard, designed for packaging bearings in accordance with GOST 520-89 and GOST hinged bearings 3635-78 and their parts.